Mad Catz Thermometer HI 98121 User Manual

Instruction Manual  
Dear Customer,  
FUNCTIONAL DESCRIPTION  
CE DECLARATION OF CONFORMITY  
Thank you for choosing a Hanna product. This  
manual will provide you with the necessary informa-  
tion for correct operation. Please read it carefully  
before using the meter.  
If you need additional technical information, do not  
hesitate to e-mail us at [email protected].  
HI 98121  
Waterproof pH / ORP &  
Temperature Meter  
This instrument is in compliance with the  
tives.  
direc-  
PRELIMINARY EXAMINATION  
Remove the instrument from the packing material and  
examine it carefully. If any damage has occurred  
during shipment, immediately notify your Dealer or  
the nearest Hanna Customer Service Center.  
Each meter is supplied with:  
HI 73127 pH electrode  
HI 73128 Electrode removal tool  
• 4 x 1.5V batteries  
Recommendations for Users  
Before using this product, make sure that it is entirely  
suitable for the environment in which it is used.  
The glass bulb at the end of the electrode is sensitive  
to electrostatic discharges. Avoid touching the glass  
bulb and the ORP electrode at all times.  
Anyvariationintroducedbytheusertothesuppliedequip-  
ment may degrade the instrument’s EMC performance.  
To avoid electrical shock, do not use this instrument  
when voltages at the measurement surface exceed 24  
VAC or 60 VDC. To avoid damages or burns, do not  
perform any measurement in microwave ovens.  
Note: Conserve all packing material until the instru-  
ment has been observed to function correctly.  
Any defective item must be returned in its  
original packing.  
This Instrument is in  
Compliance with  
CE Directives  
w w w . h a n n a i n s t . c o m  
1. Battery compartment  
2. Liquid Crystal Display (LCD)  
3. ON/OFF/MODE button  
4. HI 73127 pH electrode  
5. Temperature sensor (behind)  
6. ORP electrode  
US DESIGN PATENT  
D462,024  
WARRANTY  
HI 98121 is warranted for one year against defects  
in workmanship and materials when used for its  
intended purpose and maintained according to in-  
structions. The electrode is warranted for a period  
of six months. This warranty is limited to repair or  
replacement free of charge.  
GENERAL DESCRIPTION  
ACCESSORIES  
7. SET/HOLD button  
HI 98121 is a waterproof pH, ORP and temperature  
meter. The housing has been completely sealed against  
humidity and designed to float.  
All pH readings are automatically temperature com-  
pensated (ATC), and temperature values can be  
displayed in °C or °F units.  
The meter can be calibrated at one or two points for  
pH (with auto-buffer recognition and against five  
memorized buffer values), while the mV (ORP) range is  
factory calibrated.  
Measurements are highly accurate with a unique  
stability indicator right on the LCD.  
This meter is also provided with battery level indication  
at start-up, and with a low battery symbol which  
warns the user when the batteries need to be replaced.  
In addition the Battery Error Prevention System (BEPS)  
avoids erroneous reading caused by low voltage level  
by turning the meter off.  
The HI 73127 pH electrode, supplied with the meter, is  
interchangeable and can be easily replaced by the user.  
The stainless steel encapsulated temperature sensor  
facilitates faster and more accurate temperature mea-  
surement and compensation.  
HI 73127 Replaceable pH electrode  
HI 73128 Electrode removal tool  
Damages due to accident, misuse, tampering or lack  
of prescribed maintenance are not covered.  
HI 70004P pH 4.01 solution, 20 mL sachet (25 pcs)  
HI 70006P pH 6.86 solution, 20 mL sachet (25 pcs)  
HI 70007P pH 7.01 solution, 20 mL sachet (25 pcs)  
HI 70009P pH 9.18 solution, 20 mL sachet (25 pcs)  
HI 70010P pH 10.01 solution, 20 mL sachet (25 pcs)  
HI 7004M pH 4.01 solution, 230 mL bottle  
HI 7006M pH 6.86 solution, 230 mL bottle  
HI 7007M pH 7.01 solution, 230 mL bottle  
HI 7009M pH 9.18 solution, 230 mL bottle  
HI 7010M pH 10.01 solution, 230 mL bottle  
HI 7021M ORP test solution (240 mV), 230 mL bottle  
HI 7022M ORP test solution (470 mV), 230 mL bottle  
HI 7061M Electrode cleaning solution, 230 mL bottle  
HI 70300M Electrode storage solution, 230 mL bottle  
HI 7091M Pretreatment reducing solution, 230 mL  
HI 7092M Pretreatment oxidizing solution, 230 mL  
If service is required, contact the dealer from whom  
you purchased the instrument. If under warranty,  
report the model number, date of purchase, serial  
number and the nature of the failure. If the repair is  
not covered by the warranty, you will be notified of  
the charges incurred. If the instrument is to be re-  
turned to Hanna Instruments, first obtain a Returned  
Goods Authorization Number from the Customer  
Service department and then send it with shipment  
costs prepaid. When shipping any instrument, make  
sure it is properly packaged for complete protection.  
1. Automatic Temperature Compensation  
Indicator  
2. Stability indicator  
3. Battery life percentage indicator  
4. Low battery indicator  
5. Secondary display  
All rights are reserved. Reproduction in whole or in  
part is prohibited without the written consent of the  
copyright owner, Hanna Instruments Inc., Woonsocket,  
Rhode Island, 02895 , USA.  
6. Primary display  
7. Measuring unit for primary display  
Hanna Instruments reserves the right to modify the design, con-  
struction and appearance of its products without advance notice.  
ISTR98121 03/03  
 

Lenmar Enterprises Car Speaker SPK300K W User Manual
Lindy Computer Hardware 51535 User Manual
Link electronic Network Router 861 XL1616D User Manual
Marantz Car Satellite TV System SR4023 User Manual
Marmitek Stereo Receiver GigaVideo45 User Manual
Maytag Washer Dryer MAV6250 User Manual
Maytag Washer W10560153B User Manual
McCulloch Chainsaw MAC 20X User Manual
Melissa Mixer 646 076 User Manual
Mellerware Convection Oven 24825 User Manual